Cleats for electric traction, track circuit and other jumpers

Back

Scope and field of application

These cleats are used to hold in place jumper and connector wires at specific points along the route to ensure they are insulated from the ground and rails.
The following types of these cleats are avilable:

Insulating cleats for cables routed under the base of a rail.
Insulating cleats to hold in place and protect cables along their route.

Mk. 1 to hold in place one or two-wire jumpers and connectors (single).
Mk. 2 to hold in place three or four-wire jumpers (dual).
Download detailed information

Main technical features

Voltage from an AC power supply with an apparent power of 0.5 kV•A	> 2.5 kW for 1 min
Dielectric resistance of the fastening unit in relation to the support structure of the cleat	> 10 MΩ - under standard climatic conditions; > 0.5 MΩ - at a relative humidity of 98% and temperature of 25 + 10⁰C
Climatic category of the product UKhL2	as per GOST 15150-69
Location category according to mechanical loads MS5	as per OST 32.146-2000
Location category according to climatic factors K4	as per OST 32.146-2000
Device protection class IP X7	as per GOST 14254-96
Weight for the route cleat	< 1,3 kg
Weight for the under-rail cleat	< 1,1 kg
Service life	7 years
Warranty period	3 years
Dimensions	88 x 500 mm for single route; 106 x 500 mm for dual route; 230 x 130 mm for single and dual under rail